Jiaxing Chenxi Hardware Co., Ltd.
Jiaxing Chenxi Hardware Co., Ltd. customers first、quality first、honest
Add to Cart
EPD DRIVE PINS SHOOTING NAIL WITH RED FLUTE POWER ACTUATED FASTENERS CONCRETE STEEL NAILS
1. Mechanical Properties
These .300 DRIVE PINS are manufactured from C-1060 steel and austempered to a core hardness of HRC 52 to 56.To insure ductility,these .300 DRIVE PINS are bend tested during Quality Control inspection to about 60 degrees.
2. Corrosion Resistance:
These .300 DRIVE PINS are designed to be used in a non-corrosive atmosphere unless application specific corrosion testing has been performed.The standard for this .300 DRIVE PINS is applied zinc meeting the international requirement providing an average thickness of 5 micron(0.0002")with no supplementary coating.
3. Shoot Test:
These DRIVE PINS received the acceptance inspection by shoot with power actuated tool for penetrating A3 steel plate of 8mm thickness.
| Model | Length | Kg/100pcs |
| EPD13P10 | 1/2"K | 0.21 |
| EPD16P10 | 5/8"K | 0.23 |
| EPD19P10 | 3/4"K | 0.26 |
